Item # 17967
Limited Edition Roundhouse Train Set & Table
Assembly Instructions
x 2
x 2
x 2
x 2
x 2
x 2
x 2
x 2
x 2
x 2
A. Cross Dowel Bolt
x 20 pcs
2 3/16 in / 56 mm
HARDWARE
Train Table Parts List
STEP 1
Drawer Assembly
STEP 2
STEP 3
*Repeat steps 1-3 for
second drawer.
B. Cross Dowel Bolt
x 8 pcs
1 in / 25 mm
D. Screw x 16 pcs
1 in / 25 mm
E. Screw x 4 pcs
1 1/4 in / 31 mm
F. Drawer Stop x 4 pcs
G. Wooden Dowel x 8 pcs
Allen Wrench x 1 pc
The following tool
(not included) is required
for assembly:
C. Small Cross Dowel Nut
x 12 pcs
Phillips
®
Screwdriver
D
D
D
D
D
D
D
D
H. Big Cross Dowel Nut
x 8 pcs
1
2
3
4
5
7
6
8
9
10
11
12
13
14
1
2
3
4
5
To order replacement parts, please visit www.kidkraft.com
Please retain this information for future reference
© 2011 KidKraft, LP
Customer Service
1-800-933-0771
www.kidkraft.com
1
USE AND MAINTENANCE:
-Use on level surfaces only
-Please check assembly at regular intervals, and
frequently tighten hardware if necessary. If
maintenance is not carried out, the product could
cease to function properly.
WARNING:
CHOKING HAZARD. Small parts and sharp points, not suitable
for children under 3 years.
CAUTION:
ADULT ASSEMBLY REQUIRED. Hardware contains
small screws with sharp points. Keep unassembled
parts out of the reach of small children.
