67
100
A
TNR4 Post
Mount Base
TNR4 Post
Mount Clamp
S37
Square
Lock
Nut
S6
8965
¼ x 14.5mm
Pan Head Bolt
Fig. 33.2
Hardware
2 x
#12 x 1” Pan Screw
1 x
#8 x 3” Wood Screw
2 x
#8 x 2” Wood Screw
1 x
#7 x 5/8” Pan Screw
Other Parts
2 x TNR4 Post Mount Clamp
1 x TNR 4 Post Mount Base
1 x 1/4 x 14.5 mm Pan Head Bolt
1 x Square Lock Nut
S6
S4
S11
S37
Step 33: Attach TNR Brace Assembly
Remove PB1 (1/4 x 3/4”
Pan Bolt) first then install
PB2 (1/4 x 1-1/4” Pan Bolt
with previously removed
lock nut)
8965
8963
8963
S11
S4
2618
2618
TNR Brace
Assembly
Fig. 33.1
Fig. 33.3
A:
Place 1 TNR4 Post Mount Clamp on either side of the Clamp Ring so that the bent tops clip in behind the
Clamp Ring. (fig. 33.2)
B:
Insert the TNR4 Post Mount Base in between the 2 Post Mount Clamps and screw all pieces together using
1 ¼ x 14.5mm Pan Head Bolt and Square Nylock Nut. (fig. 33.2)
C:
Attach TNR4 Post Mount Base to (8965) TNR Upright, pre-drill with a 1/8” drill bit then attach with 2 (S6) #12
x 1” Pan Screws. (fig. 33.2)
D:
Attach the Post Mount Clamp to the clamp ring using 1 (S37) #7 x 5/8” Pan Screw. (fig. 33.2)
E:
Attach (8963) TNR Ground Brace flush to the bottom of (2618) Front Back Panel with 2 (S11) #8 x 2” Wood
Screws and 1 (S4) #8 x 3” Wood Screw. (fig. 33.1 and 33.3)
Summary of Contents for F24935
Page 87: ...87 NOTES NOTES...
Page 88: ...88 NOTES NOTES...
