manualshive.com logo in svg

KidKraft F24935, Installation And Operating Instructions Manual

Share
Download
KidKraft F24935 Installation And Operating Instructions Manual Download Page 1

# F24

935

M

IS

SI

NG

 SOMETH

IN

G

?

•  C

A

LL

 US O

R GO O

NL

IN

E 

 •

 

INSTALLATION AND OPERATING INSTRUCTIONS

 

 

ASSEMBLY TIME 

12 - 18 HOURS

TWO-PERSON 

ASSEMBLY

WARNING. ONLY 

FOR OUTDOOR 

DOMESTIC USE  

Mockingbird View 

Swing Set and 

Activity Center

Rev 04/30/2021

9404935

FOR 24/7 ONLINE PARTS REPLACEMENT

parts.kidkraft.com

parts.kidkraft.eu

KidKraft, Inc.

4630 Olin Road

Dallas, Texas 75244

USA
[email protected]

[email protected]

1.800.933.0771

972.385.0100

+31 20 305 8620

M-F from 09:00 to 17:30 (GMT+1)

KidKraft Netherlands BV

Olympisch Stadion 8

1076 DE Amsterdam

The Netherlands

To reduce the risk of serious injury or death, please read and follow 

these instructions.  Keep and refer to instructions as needed and 

pass along to any future owners of this item.

WARNING

OBSTACLE FREE SAFETY ZONE - 31’-7” L x 27’ D x 16’ H (10.9 x 8.2 x 4.9m) area requires Protective Surfacing. See page 3. 
MAXIMUM VERTICAL FALL HEIGHT - 6’9”(2.06m)
CAPACITY -13 Users Maximum, Ages 3 to 10; Weight Limit 110 lbs. (50 kg) per child.
RESIDENTAL HOME USE ONLY. Not intended for public areas such as multi-unit  
residences, schools, churches, nurseries, day cares or parks.

9' - 6"

2.9m

31' - 7"

9.6m

27' - 0"

8.2m

 18' - 7" 

 11' - 5" 

Summary of Contents for F24935


























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands