Step 16: Attach Ground Stakes
A:
Drive 2 (0318) Ground Stakes 10-1/2” into the ground at the 2 (1771) Posts on (1770) SW Ground as shown
in fig.16.1. Attach using 2 (S3) #8 x 2-1/2” Wood Screws per ground stake. (fig. 16.1)
MOVE FORT TO FINAL LOCATION. FINAL LOCATION MUST BE ON LEVEL GROUND
Fig. 16.1
S3
1770
1771
1771
0318
0318
S3
Floor boards were
removed for clarity
2 x
Ground Stake 1 1/4 x 1 1/2 x 14”
0318
Hardware
Wood Parts
4 x
#8 x 2-1/2” Wood Screw
S3
WARNING:
To prevent tipping and avoid potential
injury, stakes must be driven 10-1/2” into ground.
Digging or driving stakes can be dangerous if you do not
check first for underground wiring, cables or gas lines.
30
Summary of Contents for F24145
Page 40: ...NOTES 40...
