Step 3: Swing Beam
Fig. 3.1
Side with
Overhang
H8
1772
1773
Fig. 3.2
Fig. 3.3
Fig. 3.4
4919
G5
G8
1 x
SW Rail Block 2 x 4 x 5-3/8”
4919
Hardware
Wood Parts
1 x
1/4 x 4-1/4” Hex Bolt
(1/4” lock washer, 1/4” flat washer, 1/4” t-nut)
1 x
5/16 x 4-1/2” Hex Bolt
(5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
1 x
5/16 x 2” Hex Bolt
(5/16” flat washer x 2, 5/16” lock nut)
H8
G5
A:
Place (4919) SW Rail Block in the centre between (1773) CE SW Beam Front and (1772) CE SW Beam Back
and attach beams with 1 (H8) 1/4 x 4-1/4” Hex Bolt (with flat washer, lock washer and t-nut). (fig. 3.1 & 3.2)
B:
Attach Swing Beam Assembly to the side of the Swing End Assembly with the overhang (fig. 3.3) using 1 (G5)
5/16 x 4-1/2” Hex Bolt (with lock washer, flat washer and t-nut) in the top hole of Triangle Plate and 1 (G8) 5/16 x
2” Hex Bolt (with 2 flat washers and lock nut) in the bottom hole of Triangle Plate. (fig. 3.3) Make sure Swing End
Assembly flares out at an angle. (fig 3.4)
Hex Bolt Assembly
Lock
Washer
T- Nut
Flat
Washer
He x
Bolt
G8
16
Summary of Contents for F24145
Page 40: ...NOTES 40...
