57
M
IS
SI
NG
SOMETH
IN
G
?
•
C
A
LL
US O
R GO O
NL
IN
E
•
parts.kidkraft.eu
+31 20 305 8620
M-F from 09:00 to 17:30 (GMT+1)
Step 25: Roof Support Assembly
Part 1
Wood Parts
2 x
Top Swing 1 x 2 x 56 7/16”
2 x
Support Upright 1 x 2 x 10 5/8”
2 x
Roof Support 1 x 2 x 34 1/16”
9501
9502
9503
Hardware
8 x
#8 x 3” Wood Screw
S4
S4
S4
9501
9502
Fig. 25.1
S4
9503
A:
Place (9501) Top Swing flat on the ground with the angles facing up. The sharper angle should be on the right
end. Place (9503) Roof Support as shown in fig. 25.1 making sure that it’s flush with the edge of (9501) Top Swing.
B:
Place (9502) Support Upright as shown in fig. 25.1, making sure that it’s flush with the end of (9503) Roof
Support and centered over the pre-drilled holes in (9501) Top Swing. Check to ensure that the assembly is square
then attach boards using 4 (S4) #8 x 3” Wood Screws.
C:
Repeat steps A and B to create a second assembly.
Flush
Flush
