7.1 Removing the sunshield
Unzip the zipper between the sunshield and the shell cover. Now the suns-
hield can be removed.
7.2 Removing the belt padding and inlay cover
Release the belt clip (B) and pull the belt clip padding from the clip in an
upwards movement.
Now the Velcro® fasteners on the outsides of the shoulder belt padding (D)
can be opened to remove the padding.
The inlay cover can be removed by opening the Velcro® fasteners next to
the shoulder belts (D). Now the inlay cover can be removed by pulling it
upwards from the headrest (E).
7.3 Removing the shell cover
To remove the shell cover, slide the headrest to the uppermost position first.
Now the attachment eyelets (Fig. 28, No. 1) in the lower area can be unfa-
stened.
Then slide the headrest to the lowest position and unfasten the upper eye-
lets (Fig. 28, No. 1).
Now open the Velcro® fasteners next to the lap belts.
Loosen the attachment hooks on the shell rim next to the lap belt guides (K).
Now pull the cover out from under the central adjustment button (N) and from
under the lap belt guides (K), push the belt clip (B) through the cover and
remove (Fig. 29).
12
ENG
Summary of Contents for MAXIFIX PRO -
