
18
WARNING!
• Deac0va0on of the alarm is permanent. Once the alarm has been deac0vated, it cannot be reac0vated!
• Once deac0vated, the alarm will NO LONGER DETECT SMOKE or CO.
• Once the alarm is deac0vated the ba1ery will be depleted and the alarm will no longer func0on.
• Once the alarm has been deac0vated, it cannot be mounted onto the moun0ng plate or reac0vated.
WARNING!
Failure to turn off alarm as instructed prior to disposal may create poten0al for lithium ba1ery related fire or hazard.
17. MAINTENANCE OF YOUR ALARM
To keep your alarm in good working order:
• Test every week by pushing the Test/Reset bu1on. The unit will emit 3 long beeps repeated
twice (simulated smoke alarm), followed by 4 short beeps repeated twice (simulated CO
alarm). NOTE: due to the loudness of the sounder, stand at arm's length when tes0ng.
•
NOTE:
do not use naked flame sources, such as lighted candles, to test your apparatus.
• Keep away from solvents or detergents
• Avoid spraying air-freshener, hair-spray near the alarm
• Do not paint the alarm. If decora0ng or using adhesives close to the alarm, remove it
temporarily
• Keep away nappy buckets
• Storage and Transport Condi0ons: -20° C to +60° C, 5-95%RH (non-condensing)
The following substances can affect the sensor and cause false alarms:
Methane, Propane, Iso-butane, Iso-propanol, Ethylene, Benzene, Toluene, Ethyl acetate, Hydrogen
Sulphide, Hydrogen, Sulphur Dioxide, alcohol based products, paints, thinners, solvents, adhesives,
hair-sprays, a"ershaves or perfumes and some cleaning agents.
NOTE: there could be other compounds occurring within a par0cular household which could cause
similar effects.
Warning:
Do not tamper with the apparatus, as there is a risk of electric shock or malfunc0on.
!
2534-7208-00(WFPCO)_UK_V14.qxp:_ 2015.12.3 2:58 PM Page 18