
11
Ribs (2
places)
Mounting Option 1
Slots
Mounting Option 2
OPTION 1 - Easy mount to drywall only;
1. Choose a mounting location (wall or ceiling) and drill a 5mm
hole through drywall.
2. Insert the provided screw through the mounting plate aligning
the ribs on the screw with the slots on the mounting plate.
3. Tighten the screw/mounting plate to wall or ceiling until it is
snug against surface. DO NOT over-tighten.
OPTION 2 - Mounting onto other Surfaces
1. Choose a location (wall or ceiling) and using the mounting
plate provided as a template, mark three hole locations.
2. Install the three provided screws through the mounting plate
and tighten. DO NOT over-tighten screws (if mounting in
plasterboard or similar surface, drill 5mm holes and use the
plastic anchors provided). Anchors are not required for
mounting on hard surfaces such as wood.
10. INSTALLATION INSTRUCTIONS
2534-7208-00(WFPCO)_UK_V14.qxp:_ 2015.12.3 2:58 PM Page 11