8. Alarm Visual and Audible Indicators
The following table describes the visual and audible conditions the unit may
encounter.
Operational
Mode
Visual
Indications
Audible
Indications
Note / Action:
Normal
Operation
Green LED on
continuous: AC power
applied.
Green LED blink every
60 seconds: Battery
Backup, (DC Only).
None
Test/Hush Button
Press (strobe dome)
Red LED blink in time
with alarm pattern.
Strobe will flash 1 time
per second if AC power
is applied.
Two sets of 3 long beeps
with voice “Fire! Feu!”
and two sets of 4 quick
beeps with voice message
“Warning! Carbon
Monoxide. Monoxyde de
carbone.”
Perform Test/Hush
button press once a
week to verify proper
alarm operation.
Smoke or Fire
detected
Red LED blinks in time
with alarm pattern.
Strobe will flash 1 time
per second if AC power
is applied.
3 long beeps, voice
message “Fire! Feu!”,
3 long beeps repeating.
Smoke has been
detected. Follow the
instructions at the
beginning of this User
Guide under the section
“What to do when the
alarm sounds, Smoke
Alarm activation”.
CO detected
Red LED blinks in time
with alarm pattern.
Strobe will flash 4 times,
go off for 5 seconds, and
then repeat, if AC power
is applied.
4 quick beeps, voice
message “Warning!
Carbon Monoxide.
Monoxyde de carbone.”,
4 quick beeps, repeating.
Carbon monoxide has
been detected. Follow
the instructions at the
beginning of this User
Guide under the section
“What to do when the
alarm sounds, CO alarm
activation.”
Smoke Alarm Hush
(button/dome press
while unit is in smoke
alarm)
Red LED blink every 2
seconds
Voice message “Hush
Mode Activated. Mode
Hush activé.”
Pressing the Test/Hush
button (dome) during
a known smoke alarm
event will activate the
Hush feature which
will silence the alarm
for approximately 8-10
minutes. This feature is
to be used only when a
known alarm condition,
such as smoke from
cooking, activates the
alarm.
Smoke Alarm Hush
Mode Cancelled
None
Voice message “Hush
Mode Cancelled. Mode
Hush annulé.”
When smoke levels
drop below the alarm
threshold, or if the
user presses the Test/
Hush button (dome)
again, voice message
will occur.
