SMART HUSH
™
CONTROL:
The SMART HUSH
™
feature has the
capability of temporarily desensitizing the alarm circuit for approximately
10 minutes.
This feature is to be used only when a known alarm condition, such
as smoke from cooking, activates the alarm. The smoke alarm is
desensitized by pushing the Test/Hush button on the smoke alarm cover.
If the smoke is not too dense, the alarm will silence immediately and
the red LED blinks every 10 seconds. This indicates that the alarm is in a
temporarily desensitized condition.
Model P3010B-CA
will issue a voice prompt stating “Hush Mode
Activated. Mode Hush activé.”
Model P3010H-CA
will turn off the amber safety light.
The smoke alarm will automatically reset after approximately 10 minutes
and sound the alarm if particles of combustion are still present.
Model P3010B-CA
will issue a voice prompt stating “Fire! Fire! Feu! Feu!”
The SMART HUSH
™
feature can be used repeatedly until the air has
been cleared of the condition causing the alarm. Pushing the Test/Hush
button on the alarm will end the temporarily desensitized period.
Model P3010B-CA
will issue a voice prompt stating “Hush Mode
Cancelled. Mode Hush annulé.” after the Test/Hush button has been
pressed.
If the smoke is not too dense, after ten minutes the alarm will return to
normal operation.
NOTE: Dense smoke will override the SMART HUSH™ feature and sound
a continuous alarm.
!
CAUTION: Before using the alarm SMART HUSH™ feature, identify
the source of the smoke and be certain safe conditions exist.
7. Nuisance Alarms