background image

1

IMPORTANT

THIS CARBON MONOXIDE ALARM IS DESIGNED TO
DETECT CARBON MONOXIDE GAS FROM ANY SOURCE
OF IMPROPER OR MALFUNCTIONING APPLIANCES. IT
WILL NOT SENSE SMOKE, FIRE, OR ANY POISONOUS
GAS OTHER THAN CARBON MONOXIDE. FOR THIS REA-
SON YOU MUST INSTALL SMOKE ALARMS TO PROVIDE
EARLY WARNING OF FIRE AND TO PROTECT YOU AND
YOUR FAMILY FROM FIRE AND ITS RELATED HAZARDS. 

WARNING!

THIS UNIT IS NOT A SMOKE ALARM. IT WILL NOT SENSE
SMOKE OR FIRE. IT IS NOT A SUBSTITUTE FOR
INSTALLING AND MAINTAINING AN APPROPRIATE NUM-
BER OF SMOKE ALARMS IN YOUR HOME. FOR EARLY
WARNING OF FIRE, YOU MUST INSTALL SMOKE ALARMS
EVEN THOUGH CARBON MONOXIDE CAN BE GENERAT-
ED BY FIRE.

THIS PRODUCT IS INTENDED FOR USE IN ORDINARY
INDOOR RESIDENTIAL AREAS. IT IS NOT DESIGNED TO
MEASURE COMPLIANCE WITH COMMERCIAL AND INDUS-
TRIAL STANDARDS.

THE INSTALLATION OF THIS DEVICE SHOULD NOT BE
USED AS A SUBSTITUTE FOR PROPER INSTALLATION,
USE AND MAINTENANCE OF FUEL-BURNING APPLI-
ANCES, INCLUDING APPROPRIATE VENTILATION AND
EXHAUST SYSTEMS.  

INDIVIDUALS WITH MEDICAL PROBLEMS MAY CONSIDER
USING WARNING DEVICES WHICH PROVIDE AUDIBLE AND
VISUAL SIGNALS FOR CARBON MONOXIDE CONCENTRA-
TIONS UNDER 30 PPM.

THIS ALARM WILL NOT WORK WITHOUT POWER. THIS
ALARM REQUIRES A CONTINUOUS SUPPLY OF POWER.
DURING A POWER OUTAGE, UNIT WILL OPERATE FOR AT
LEAST 20 HOURS ON A 9 VOLT BATTERY WITH FULL
CAPACITY. 
ELECTRICAL SHOCK OR MALFUNCTION MAY OCCUR IF
TAMPERED WITH, OR NOT INSTALLED IN ACCORDANCE
WITH MANUFACTURERS INSTRUCTIONS.

2520-7201-00.qxd  2006.4.7  3:56 PM  Page 1

Summary of Contents for 900 0191





























Reviews: