Lithium (non-replaceable sealed in) Battery-Operated
Smoke Alarm with HUSH
TM
Control to temporarily silence
nuisance alarms.
0
9
1
0
U
K
Smoke Alarm
Installer’s Guide
For model: 0910UK
Manual P/N 820-1135 Rev. E
0910-7207-03
This alarm detects products of combustion using the ionisation technique. It contains
0.9 microcurie of Americium 241, a radioactive material (see Section 9).
Ionisation sensing alarms may detect invisible fire particles (associated with fast flaming
fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible
fire particles (associated with slow smoldering fires) sooner than ionisation alarms.
Home fires develop in different ways and are often unpredictable. For maximum
protection, Kidde recommends that both Ionisation and Photoelectric alarms be
installed.
Installation instructions and product information can be found within this manual.
•
Read these instructions
thoroughly
before proceeding.
CONTENTS
1 -- RECOMMENDED LOCATIONS FOR ALARMS
2 -- LOCATIONS TO AVOID
3 -- INSTALLATION INSTRUCTIONS
4 -- TESTING
5 -- NRPB INFORMATION
6 -- SERVICE AND WARRANTY
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with Local Authority or Installer
for recycling advice.
EN14604: 2005
LPCB Ref No. 904a/01
EN14604: 2005
Licence No. KM524754
0832-CPD-0941
0910-7207-03_R1.qxd:_ 2009.8.13 6:52 PM Page 1
