background image

06-235864-001

Rev. AB      ©2002 Kidde-Fenwal, Inc.       Printed in USA

LIMITED WARRANTY STATEMENT

Kidde-Fenwal, Inc. represents that this product is free from defects in material and workmanship, and it will repair or replace

any product or part thereof which proves to be defective in workmanship or material for a period of twelve (12) months from

the date of purchase but not to exceed eighteen (18) months after shipment by Kidde-Fenwal Inc. For a full description of

Kidde-Fenwal’s LIMITED WARRANTY, which, among other things, EXCLUDES warranties of MERCHANTABILITY and

FITNESS FOR A PARTICULAR PURPOSE and liability for CONSEQUENTIAL DAMAGES, please read the entire LIMITED

WARRANTY on the Kidde-Fenwal Quotation, Acceptance of Order and/or Original Invoice which will become part of your

sales agreement. Please contact Kidde-Fenwal directly for a return material authorization (RMA) number before returning

material to the factory at Ashland, Massachusetts, shipment prepaid. Kidde-Fenwal will repair or replace and ship prepaid.

These instructions do not purport to cover all the details or variations in the equipment

described, nor do they provide for every possible contingency to be met in connection

with installation, operation and maintenance. All specifications subject to change without

notice. Should further information be desired or should particular problems arise which

are not covered sufficiently for the purchaser’s purposes, the matter should be referred

to KIDDE-FENWAL INC., Ashland, Masssachusetts

Kidde is a registered trademark of Kidde-Fenwal, Inc.

Summary of Contents for KRS-100













Reviews:

Related manuals for KRS-100