S i d e
4 | 10
SCOPE OF DELIVERY
ESP8266 module (e.g. NodeMCU, Lolin, etc.) called microcontroller
Push-button
Display module 8x32 dot-matrix
Cables
Pre-uploaded firmware (ready to run)
not included:
(Optional) 5V mobile phone power supply with micro USB connector
(Optional) temperature / humidity sensor
REQUIREMENT ON YOUR SIDE
You need internet connected wifi at the destination place of social counter.The counter supports
only WPA2. Public captive portals are not supported.
INSTALLATION
The counter need a 5V power supply with minimum 2A (available in the shop). The power cord
must be with a micro-usb connector.
After first start of the social-counter (factory default) you will find a captive-portal as wifi-
accesspoint. You have to search a wifi network with the following name: „Kidbuild Social Counter“.
You are able to connect with any device with browser support like mobile smart phone, tablet or
laptop.
