4
Steering rod
Raised protrusion
M5 x 57 Screw
6
Nut
5
14
3.
Attach the
wiring harness
connector from the Steering Wheel into
the wiring harness connector
in the Dashboard.
4.
Remove M5 x 57 screw (part: #1
7
) from the Steering Wheel. Insert
the Steering Wheel onto the rod and slide it into the pocket on
the Dashboard.
Note:
The raised protrusion on the back of the
Steering Wheel column should be facing up. Align the hole for the
screw in the Steering Wheel with the hole in the Steering Rod.
5.
Re-insert the M5 x 57 screw through the Steering Wheel and
Steering Rod.
6.
Fasten the nut onto the other side of the screw and tighten.
3
Steering wheel connector
Car body connector
Steering rod
Summary of Contents for Dodge Charger
Page 2: ......
