Kicker SXRC, Owner'S Manual

Page: 43 / 88

43
SXRC Remote Control
Opera
tion
When you are done adjusting the low pass
crossover in this group press the
ESC key
while in the
frequency
and
slope
options
menu to return to the GROUP ADJ menu and
choose another function to adjust.
NOTE:
While you are in the LO-PASS menu the
LPF
indicator on the ISIS display is lit. This
indicates you are making adjustments in
the LO-PASS menu.
The KICKER SXRC monitors and prevents any low pass
crossover point from being set any closer than 1/3 octave from
the high pass crossover point. If you cannot set the low pass
crossover where you want then check the ISIS display and see if
the
LPF
is lit and the
HPF
indicator is
flashing. If it is then you need to go to the
GROUP ADJ. HI-PASS menu and lower the
high pass crossover point.
This is done as a safety precaution to prevent a notch filter
condition.
lo-pass MENU - Here is where you adjust the selected
group’s low pass crossover controls. All amplifiers in the group
will be adjusted.
Use the UP and DOWN keys to scroll
through
frequency
and
slope
and then
press the ENT key to select.
FREQUENCY selects the crossover point and can be set at any
1/12th octave spaced frequency from 30 Hz to 20 kHz.
(
30 Hz to 20325 Hz ) SX.1 Series is 30 Hz to 200 Hz in 1 Hz
steps.
Use the
UP
and
DOWN
keys to select your
frequency. Press the ESC key to save your
setting and return to the
frequency
and
slope options menu. You can now select
another low pass crossover option to adjust
in this group if desired.
SLOPE selects the roll-off of the crossover and can be set
from
oFF
to
36 dB/OCT
in 6 dB steps. SX.1 Series is OFF to
48 dB in 6 dB Steps.
Use the UP and DOWN keys to select your
low pass crossover slope. Press the
ESC
key to save your setting and return to the
frequency
and
slope
options menu. You
can now select another low pass crossover
option to adjust in this group if desired.
HOME
ENT
ESC
HOME
ENT
ESC
HOME ENT ESC
HOME ENT ESC
s s l o o p p e e
SYS
MEM-1
GAIN GAIN EQ LPF HPF KOMP
AMP1
LOCK
MEM-2 MEM-3 MEM-4
PHASE
MUTE
AMP2
LEFT LEFT RIGHT RIGHT
1 1 0 0 6 6 h h z z
SYS
MEM-1
GAIN GAIN EQ LPF HPF KOMP
AMP1
LOCK
MEM-2 MEM-3 MEM-4
PHASE
MUTE
AMP2
LEFT LEFT RIGHT RIGHT