Wiring
Your Midbass driver has two spring loaded terminals. The red terminal is con-
nected to the positive wire and the black terminal is connected to the negative
wire from the source unit or amplifier. Since your midbass drivers have a limited
frequency range it is recommended to use a bandpass crossover. Use either a
passive unit to connect into an existing system or for higher performance, an
electronic crossover and a dedicated amplifier.
Tweeter
+
_
+
_
SOURCE UNIT
Other
Channel
+
_
+
_
+
_
&URVVR
YHU
COIL
CAPACITOR
6 dB / Octave
400
µ
f
1.6 mH
+
_
To
Speaker
To Amplifier
+
_
12 dB / Octave
COIL
CAPACITOR
70
µ
f
9 mH
+
_
To
Speaker
To Amplifier
+
_
2.2 mH
281
µ
f
(OPTIONAL PASSIVE CROSSOVER COMPONENTS)
Midrange
RMB Midbass
If you have more questions about the installation of your KICKER component,
see the Authorized KICKER Dealer where you made your purchase. You may con-
tact us via the Technical Services page on www.kicker.com. or call our Technical
Services Line at (405)624-8583
Kicker recommends using the RMB series midbass drivers in conjunction with
the Resolution Series or Kicker Series Components. This will create a seamless
sound stage.
3
