Page 3 of 10
Fig. 8
Fig. 4
Fig. 3
Fig. 6
Fig. 5
6. Pull the radio/instrument bezel straight back and remove from dash. Fig. 5
7. Remove the screws securing the radio and pull the radio from the dash and disconnect the wiring.
Disconnect the antenna cable by pulling the locking antenna connector away from the radio.
Caution: Pulling the antenna cable straight out of the radio without pulling on the locking antenna
connector could damage the cable or radio. Fig. 6
8. Remove the two screws securing the plastic panel below the steering column indicated by the arrow
in Fig. 7, and the one 7mm screw near the kick panel. Also, remove the two 10mm bolts securing
the metal plate and remove plate.
9. Remove the dash end panel by prying loose with a panel removal tool. Fig. 8
10.
Remove the two screws securing the speaker housing. Fig. 9
11.
Remove the 10mm bolt securing the speaker housing. Fig. 10
12.
Carefully pull the dash panel outward until there is sufficient room to allow access to remove speaker
housing and disconnect wiring.
Fig. 7