6
29. Run one end of the safety strap under the bracket on the side of the enclosure and then
connect both ends to the cargo tie-down on the driver’s side of the car. Fig. 12 and Fig. 13
30. With the seatback in the up position set the
subwoofer in place against the back of the
seatback. Release the seatback and while
holding the top of the subwoofer against the
seatback slowly rotate the seatback forward until
the subwoofer bracket slides under the anchor
point on the seatback. Continue to hold the
subwoofer against the seat while rotating the
seatback rearward until it locks into the fully back
position. Fig. 14
31. Hold firm pressure against the bottom of the
subwoofer while pulling the poly bag from beneath it.
Subwoofer Installation Sedan
32. Find the anchor point on the driver’s side of the
rear seatback. The anchor point is
approximately 17 inches from the load floor and
7 inches left of the gap between the seatbacks.
Make a vertical incision in the carpet seatback
approximately 2-3 inches long. Fig. 15
33. Lay the poly bag that the subwoofer is packaged
in on top of the carpet behind the seatback to
prevent the Velcro® on the bottom of the
subwoofer from engaging the carpet prematurely.
34. With the seatback in the up position, set the
subwoofer in place against the back of the seatback. Release the seatback and while holding
the top of the subwoofer against the seatback, slowly rotate the seatback forward until the
subwoofer bracket slides under the anchor point on the seatback. Continue to hold the
subwoofer against the seatback while rotating the seatback rearward until it locks into the fully
back position.
35. Hold firm pressure against the bottom of the subwoofer while pulling the poly bag from
beneath it.
36. Reinstall all previously removed parts in reverse order.
37. Install fuse into fuse holder.
38. Reconnect negative battery cable to battery.
Fig. 12
Install
foam
strip
here
Fig. 13
Install
foam
strip
here
Fig. 14
Fig. 15
7
inches
17
inches
