background image

2

KX2500.1 Amplifier

In
troduction

KX2500.1

Congratulations! 

You have just purchased the latest in amplifier 

technology to carry the famous KICKER name. 

Your KICKER KX2500.1 amplifier is designed and built

to give you years of powerful and trouble-free

performance in SPL contests and on the street.

Please read this installation manual, it contains

valuable information to help you get the most out of

your new KX2500.1 amplifier. 

This is your “fuel for Livin’ Loud 

”!

Attention:

Please record your purchase information in the area

provided below. We recommend attaching the original

sales receipt or a copy of it to this manual for future 

reference.

If you require service on this amplifier during the 

warranty period, you will need to provide this 

information and a copy of the receipt to Kicker to 

validate your warranty.

ALWAYS KEEP YOUR RECEIPT!

KX2500.1 

Amplifier

Owner’s Manual

Mono-Block Model:

Authorized Kicker Dealer:

Purchase Date:

Amplifier Model Number:

Amplifier Serial Number:

_____________________________________________

_____________________________________________

_____________________________________________

_____________________________________________

KX2500.1

Summary of Contents for KX2500.1

















Reviews: