9
KPM50 is unresponsive or will not power on:
1.
Check that the battery is fully charged by connecting the KPM50 to a known-good power source. Allow the
KPM50 to charge for at least 4 hours, then power on the speaker. The battery is full when the
battery status LED
turns off.
2.
Reset the KPM50 by pressing and holding the
power button
.
KPM50 will not pair or connect:
1.
If you have previously paired with the KPM50, remove the pairing from your device by pressing ‘Unpair’ or ‘Forget
this Device’ per the instructions for your audio device.
2.
Press and hold the
PLAY|PAUSE button
for 3 seconds to enter pairing mode. Make sure your audio device is
scanning or in ‘discovery mode’, then select Kicker KPM50.
Device paired and connected, but volume is low or inaudible:
Check the audio levels of both devices.
TROUBLESHOOTING
|
RESOLUCIÓN DE PROBLEMAS
|
DÉPANNAGE
