3
Bar Diameter
Bolt Length
1-1/2” to <1-3/4”
1-1/8”
1-3/4” to 2-1/4”
1-1/2”
<2-1/4” to <2-7/8”
2”
2-7/8” to <3”
2-1/2”
3” to 3-1/8”
3”
lower mounting
bracket
Figure 1
upper mounting
bracket
stainless steel socket-head cap screws
(1/4” Allen wrench – 5/16”-18 threads)
12V
}
Ground
+12V
2A fuse
(max)
≤7”
(17.5cm)
battery
LED Wiring
Black : +12V
Red : Ground
Green : Ground
Blue : Ground
Transparent Blue : S
Transparent Gray : Speaker –
Copper : Horn T
Silver : Horn Tweeter –
Step 2:
Connect the speaker and tweeter wires to your source unit or amplifi er. KICKER recommends you
solder the connections and secure them with heat shrink. It is also strongly recommended that you use a
full-range amplifi er signal. A high-pass crossover can be used if the fi lter is set to 50Hz or lower.
When hard-wiring the RGB lighting, the black lead is +12V and the red, green, and blue leads are ground.
Splice and combine the ground wires to yield a different color. There are seven colors available, depending
on your wiring confi guration. KICKER recommends using the KMLC lighting controller (sold separately) for
more colors, patterns, and special effects.
Summary of Contents for KMTC11
Page 20: ... 2017 Stillwater Designs ...
