KickAss KASMARTBG, User Manual

Page: 14 / 16

13
Mode
LED Behaviour
KASMARTBG
Behaviour
KASMARTBG Remote
Switch Behaviour
BUTTON /
LED LIGHT
Automatic
1 short GREEN LED pulse
every 4 seconds Battery voltage is above
cut-in voltage.
KASMARTBG relay is
engaged and the starter
battery and load terminals
are connected. Using the Override switch when
relay status is engaged and the
starter battery voltage is above the
cut-in setting:
1 short BLUE LED pulse
every 4 seconds Battery voltage is below the
cut-out voltage, waiting for
cut-out delay preset timeout
to expire before
disengaging the
KASMARTBG relay and
disconnecting the starter
battery and load terminals.
1 short RED LED pulse
every 4 seconds Battery voltage is below the
cut-out voltage,
KASMARTBG relay is
disengaged and starter
battery and load terminals
are disconnected.
4 SECS.
PULSE
4 SECS.
PULSE
4 SECS.
PULSE
PRESS
One press will reset the device,
disconnecting the starter battery and
Load terminal momentarily before
reconnecting.
Press 3 time to immediately
disengage the relay
while in this
state.
Using Override Switch when battery
voltage is below Cut-out setting and
relay is disengaged:
Press once again to override the
timeout delay, while the relay is
engaged. This will disengage the
relay immediately and disconnect the
starter battery and load terminals.
PRESS
One press will engage the relay for the
time period set by the timeout delay
setting, once count down is completed
the relay will return to disengaged
state and disconnect battery from the
Load terminal.