Step 1.
Locate the controller which is affixed to the back of the solar panel.
Step 2.
Locate the small black 'Mode button' on the right hand side of the digital
number display.
Step 3.
Press and hold down the button for 3 seconds or until the digital display
beside the button begins to flash. While the display is flashing, press the mode
button to select Wait until display stops flashing.
NOTE: Select , not .
Step 4.
When is selected, press the button for 3 seconds until the display starts
flashing. Release the button, then press and hold it until 2 LEDs and the display
start flashing. Continue pressing the button until you select the desired battery
mode configuration.
If your solar panel is connected to your battery and is charging normally,
indicators should show:
Battery Indicator
- Solid On
Solar Indicator
- Slow Flashing
MODE BUTTON
DIGITAL DISPLAY (L.E.D)
SOLAR INDICATOR
BATTERY INDICATOR
SOLAR CONTROLLER END VIEW
Step 5.
After suitable battery type is selected, press and hold the button until the
LEDs are not flashing.
AGM Battery
1.
Gel Battery
2.
Flooded Battery
3.
3 ternary lithium cells in series
4.
4 ternary lithium cells in series
5.
7 ternary lithium cells in series
6.
4 LiFePO4 lithium cells in series
7.
8 LiFePO4 lithium cells in series
8.
6 ternary lithium cells in series
9.
5
5.
5.
5.
8
5
