Solar Panel Controller
The controller is preset from factory for charging AGM (Type 1), so if you are using
an AGM battery you do not need to do anything. To check or change what setting
your regulator is on, please follow the instructions on the next page:
Supported Battery Modes
The solar panel controller on the back of the panel can be set to charge 9 different
battery types AGM, Gel, Flooded, 3/4/6/7 ternary lithium cells in series, 4/8
LiFePo4 lithium cells in series.
AGM Battery
1.
Gel Battery
2.
Flooded Battery
3.
3 ternary lithium cells in series
4.
4 ternary lithium cells in series
5.
7 ternary lithium cells in series
6.
4 LiFePO4 lithium cells in series
7.
8 LiFePO4 lithium cells in series
8.
6 ternary lithium cells in series
9.
(MANUAL)
Model:
KA20Areg
Working Voltage: 12/24V
Max. Charging Current: 20A
20A PWM
REGULATOR
IP68 WATERPROOF
NOTE: Please read all
the way through
instructions below at
least once before
continuing & make sure
the solar panel is
connected to your
battery and lights are
illuminated on the
Controller.
NOTE: The regulator
must be powered on
first from the battery.
Make sure to connect
the regulator with
battery first, then
connect to the solar
panel.
