6. INSTALLATION OF SAFETY SUPPORT
( For Canadian Installation ONLY )
7. MAKE THE ELECTRIC CONNECTIONS
WARNING:
To avoid possible electrical
shock, be sure electricity is turned off at the
main circuit breaker or fuse box before wiring.
A safety support cable is provided to help
prevent the ceiling fan from falling, please install
it as follows.
Step 1. Attach the provided wood screw and
washers to the ceiling joist next to the mounting
bracket but do not tighten. See Figure 10-1
Step 2. Adjust the length of the safety cable to
reach the screw and washers by pulling the
extra cable through the cable clamp until the
overall length is correct, put the end of the cable
back through the cable clamp, forming a loop at
the end of the cable. Tighten the cable clamp
securely. Now, put the loop in the end of the
safety cable over the wood screw and under the
washers. Tighten the wood screw secuely. (Fig.
10-2)
WARNING: If your house wires are different
colors than referenced in this manual, stop
immediately. A professional electrician is
recommended to determine proper wiring.
ALL electrical connections should be made with
the supplied WIRE NUTS. Make sure each
connection below is tight and secure.
Step 1. Connect the fan supply BLACK wire
and fan light supply BLUE wire to the BLACK
household supply wire as shown in Fig. 11.
Step 2. Connect the fan neutral WHITE wire to
the household neutral WHITE wire as shown in
Fig. 11.
Step 3. If your outlet box has a ground wire
(GREEN or bare copper) connect it to the fan
ground wire (GREEN); otherwise, connect the
ground wire on the hanging bracket to the fan
ground wire (GREEN).
WARNING: Be sure no bare wire or wire
strands are visible after making all connections.
Step 4. After making all of the above connect-
ing, spread them apart so the GREEN and
WHITE wire connections are on one side of the
outlet box and the BLACK and the BLUE wires
connections are on the other side. Now, push
the completed connections upward into the
outlet box.
Fig. 11
Fig. 10-1
Fig. 10-2
Safety Cable Cable Clamp
Wood Screw
Green or bare copper
(ground)
Green or bare copper
(ground)
White (neutral)
White (neutral)
Fan Assembly
Outlex box
Black (hot)
Black (hot)
Blue (for light)
Wood Screw
Outlet Box
Support Brace
Ceiling
Spring Washer
Flat Screw
6
Seaside
TM
