Kichler Lighting Design Pro 15DC100, Instruction Manual

Page: 7 / 18

7
Manually operating the Kichler Design Pro LED Controller
The Kichler Design Pro LED Controller can be operated manually to turn on or off any or all zones, such as when necessary for installation or
maintenance of a lighting system. The wattage loading on a newly installed Controller can be reviewed to assure the layout and fixtures are
installed correctly without any shorts or overloads.
1) To manually operate the Controller:
1. Press: Home>Control>Enter. The display will show the Zone Summary screen indicating the current draw (Amps), load (Watts) and the
On/Off status of the zones available for the model of controller. Press: Enter again.
2. To turn Controller Zones on: select All Zones (or select individual zones 1-6 depending on Controller model) >All Zones On>Enter.
3. To turn Controller Zones off: select All Zones (or select individual zones 1-6 depending on Controller model) >All Zones Off>Enter.
4. Press: Home>Control>Enter and confirm information on Zone Summary status screen.
This function will temporarily override any active schedules operating the Controller or zones of the Controller. At the next schedule, the Controller
will resume following the active schedules for operation of the controller.
START HERE TO BEGIN PROGRAMMING YOUR UNIT
Quick Start Set-up for Kichler Design Pro LED Controller
Using the following Quick Start Set-up, the wattage loading on newly installed Controller can be reviewed to assure the layout and fixtures are
installed correctly without any shorts or overloads.
The Kichler Design Pro LED Controller can also be easily set to activate a pre-programmed set of schedules that will turn all zones of the lighting
system on at sunset and off at sunrise every day. The installer needs only to set the date, time and geographical location (State/Province and
nearest city) to enable the preset programs.
1)
Quick start
guide to set language, geographical location, date and time:
1. The initial factory setting is English; to change Controller to French or Spanish press: Home> Initial Setup>Set Language
2. Use arrow navigation buttons to scroll up and down to select English, Français or Espanol. Then press Enter. NOTE: The Controller will
briefly turn off the display while the language library is rebuilt and then restart at the "Kichler" welcome screen. This may take up to 30
seconds or more.
3. Press: Home> Initial Setup>Set Location
4. Use arrow navigation buttons to scroll up and down to select United States or Canada. Then press Enter.
5. Use arrow navigation buttons to scroll up and down to select State or Province. Then press Enter.
6. Select closest city. There will be four (4) cities to select from according to the State or Province selected in the previous step. Choose
the one that is geographically closest. Then press Enter. Note: If the selected State or Provence has multiple time-zones, the user will
be prompted to select the correct time-zone as well. Selecting some states that have multiple time zones as well as all Canadian
provinces will prompt additional screens to confirm the time zone and or the use of Daylight Savings Time.
7. Press: Home> Initial Setup>Set Date
8. Use arrow navigation buttons to scroll left and right to select and highlight day, month and year; Use up and down navigation buttons to
adjust values. Press: Enter to continue .
9. Press: Home> Initial Setup>Set Time
10. Use arrow navigation buttons to scroll left and right to select and highlight hours, minutes and AM/PM; Use arrow navigation buttons to
scroll up and down to adjust values. Press: Enter to continue .
11. Important! Press: Home>System Settings>Save Settings. This will save the most recent settings of the Controller.
At this point the Kichler Design Pro LED Controller will automatically operate all zones, turning all zones on at sunset and off at sunrise every day
of the week.