52" Bezel LED | 11
ELECTRICAL CONNECTIONS
FINISHING THE MOTOR INSTALLATION
Step 4.
Step 4. If your outlet box has a ground wire ( green or bare copper ) connect
If your outlet box has a ground wire ( green or bare copper ) connect
it to the fan ground wires : otherwise connect the fan ground wire to the
it to the fan ground wires : otherwise connect the fan ground wire to the
mounting bracket. Secure the wire connection with a plastic nut provided.
mounting bracket. Secure the wire connection with a plastic nut provided.
After connecting the wires, spread them apart so that the green and white
After connecting the wires, spread them apart so that the green and white
wires are on one side of the outlet box and black and blue wires are on the
wires are on one side of the outlet box and black and blue wires are on the
other side. (Fig. 14)
other side. (Fig. 14)
NOTE:
NOTE: Carefully tuck the wire connections up into the outlet box.
Carefully tuck the wire connections up into the outlet box.
NOTE:
NOTE: Fan must be installed at a maximum distance of 30 feet from the
Fan must be installed at a maximum distance of 30 feet from the
transmitting unit for proper signal transmission between the transmitting
transmitting unit for proper signal transmission between the transmitting
unit and the fan’s receiving unit.
unit and the fan’s receiving unit.
Step 1.
Step 1. Remove one of the two shoulder screws in the mounting bracket.
Remove one of the two shoulder screws in the mounting bracket.
Loosen the second shoulder screw without fully removing it. (Fig. 15)
Loosen the second shoulder screw without fully removing it. (Fig. 15)
Step 2.
Step 2. Assemble canopy by rotating key slot in canopy over shoulder
Assemble canopy by rotating key slot in canopy over shoulder
screw in mounting bracket. Reinstall the shoulder screw that was previously
screw in mounting bracket. Reinstall the shoulder screw that was previously
removed, then retighten two shoulder screws securely. (Fig.16)
removed, then retighten two shoulder screws securely. (Fig.16)
Step 3.
Step 3. Securely attach and tighten the canopy hole cover over the shoulder
Securely attach and tighten the canopy hole cover over the shoulder
screws in the mounting bracket utilizing the keyslot twist-lock feature. (Fig.17)
screws in the mounting bracket utilizing the keyslot twist-lock feature. (Fig.17)
Fig. 15
Fig. 16
Fig. 17a
Fig. 17b
Shoulder Screw
Mounting Bracket
Canopy
Shoulder Screw
