ASSEMBLY INSTRUCTIONS
5
6
7
6
1/4
Inch
D
C
I
B
6. Once the proper position of the threaded nipple
(C) and mounting bracket (B) has been
determined, secure with hex nuts (D) as follows:
• Screw one hex nut (D) onto the threaded
nipple (C) and tighten against the raised
portion of the mounting bracket (B).
• Screw another hex nut (D) onto the threaded
nipple (C) and tighten against the flat portion
of the mounting bracket (B).
• Screw the remaining hex nut (D) onto
threaded nipple (C) and tighten against the
screw collar loop (I).
Hardware Used
Short Machine
Screw
x 2
BB
7. Connect mounting bracket (B) to the outlet box
with short machine screws (BB).
8. Using the threaded chain links (V) on chain (K),
attach one end to screw collar loop (I) and the other
end to fixture loop (J). Weave the fixture electrical
and ground wires through every other chain link and
pass through threaded nipple (C) into outlet box.
Lower the screw collar ring (H) and canopy (A) over
the chain (K).
8
J
H
I
J
K
V
C
A
Outlet Box
B
7
BB
