21
*IF EQUIPPED
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS .
Headlight position
Parking light position
AUTO
*
AFLS (Adaptive Front Lighting System)* /High Beam
Assist position / Daytime Running Lights (DRL)
OFF
OFF position
Headlights & High Beams
To operate:
•
Rotate lever to change the Headlight function
•
Push lever to turn High Beams ON
•
Pull lever to flash Headlights/High Beams
AFLS (Adaptive Front Lighting System)*
— When switch is in the AUTO
position and the vehicle’s ignition or the Engine Start/Stop button* is on, the
AFLS system will operate . To turn the system off, change the switch setting .
After turning the system off, headlamp swiveling no longer occurs, but leveling
operates continuously .
High Beam Assist*
— The High Beam Assist will automatically adjust the
brightness depending on brightness of oncoming vehicles and road conditions .
When switch is in the AUTO position and the vehicle’s ignition or the Engine
Start/Stop button* is on, the High Beam Assist will operate . To turn the system
off, change the switch setting .
Daytime Running Lights (DRL)*
—
DRL may help others to see the front of
your vehicle during the day . The lights will be on automatically when the ignition
or ENGINE START/STOP button* is ON and the headlight switch is in the AUTO
position, unless one of the following occurs:
•
Headlights are on
•
Parking brake is applied
•
Fog lights are on
•
Engine is turned off
Turn Signals & Fog Lights
To operate:
•
Turn Signals - Move lever Up/Down for Right/Left Turn Signal
•
Fog Lights - Rotate lever ring to turn Fog Lights ON/OFF
REMINDER:
Headlights must be ON for Fog Light operation .
One-Touch Lane Change Signal
is activated by moving the
Turn Signal Lever slightly for less than 1 second and then
releasing . The lane change signal will blink 3 times .
To change how many times (3/5/7) the Lane Change Signal
blinks, go to User Settings Mode in the LCD Instrument Cluster
modes .
REMINDERS:
•
DRL only operates during the daytime
•
The DRL system turns off when the headlights are ON, parking brake is applied
or the front fog lights are tuned on
STEERING WHEEL CONTROLS
Summary of Contents for Optima Hybrid 2017
Page 1: ......
