42
*IF EQUIPPED
EV6
F E A T U R E S & F U N C T I O N S G U I D E
STEERING WHEEL CONTROLS
ST
EER
IN
G
W
H
EEL
CON
TR
OLS
OFF
AUTO
AUTO
OFF
AUTO
AUTO
OFF
AUTO
AUTO
OFF
AUTO
AUTO
Headlight position ON
Parking light position
AUTO*
Auto Light Position / Daytime
Running Lights / High Beam Assist
OFF
Headlight OFF position
Headlights & High Beams
To operate:
•
Rotate lever to change the Headlight function
•
Push lever to turn High Beams ON
•
Pull lever to flash Headlights/High Beams
High Beam Assist (HBA)
AUTO Light position –
When the light switch is in the AUTO Light position,
the tail lights and headlights will turn ON/OFF automatically depending on
the amount of light outside the vehicle.
Daytime Running Lights (DRL) –
DRL may help others to see the front of
your vehicle during the day. The lights will be on automatically when the
ignition or POWER button* is ON and the headlight switch is in the AUTO
position, unless one of the following occurs:
•
Parking brake is applied
•
Engine is turned off
Turn Signals
To operate:
Turn Signals -
Slightly move lever up/down to activate One-Touch Lane Change Signal. Move lever Up/Down
for Right/Left Turn Signal
One-Touch Lane Change Signal
is activated by briefly pressing the Turn Signal Lever slightly up or down for
less than 1 second and then releasing. The lane change signal will blink 3-7 times.
To change how many times (3/5/7 times) the Lane Change Signal blinks, go to User Settings Mode in the LCD
Instrument Cluster modes.
PUSH
PULL
For illustrative purposes only. Your actual display, buttons and/or features may vary. Refer to section 5 in the Owner’s Manual for more information.
REMINDERS:
•
HBA will operate when vehicle speed exceeds 25 mph
•
If the lever is pushed away from you while HBA is
operational, HBA will turn off and the high beams will be
on continuously. If the lever is pulled toward you while
HBA is operational, HBA will turn off
•
If the light switch is switched to the headlight position,
HBA will turn off and low beams will be on continuously
•
The DRL system turns off when parking brake is applied
•
DRL only operates during the daytime
The High Beam Assist is designed to automatically
adjust the headlight range by switching between
high and low beams based on light detected from
oncoming vehicles and road conditions.
To enable HBA, toggle the light switch to the AUTO
Light position and turn on the high beams by
pushing the lever away from you. The High Beam
Assist indicator will illuminate.
High Beam Assist does not operate below certain
speeds, or in some lighting and driving conditions.
Please be aware of your surroundings and exercise
proper road etiquette when operating a vehicle
using the high beams.
Refer to the inside front cover for
more information on QR codes.
www.youtube.com/KiaFeatureVideos
High Beam Assist (HBA)
Video
Steering Wheel Controls
Video
QR CODE
Summary of Contents for EV6 2022
Page 1: ...Features Functions Guide ...
