3. Tighten the oil filter to the specified amount. 13-18 ft.lbs. (17-25 N.m))
4. Fill the engine with engine oil.
5. Start and run the engine and check for oil leaks.
6. After stopping the engine, check the oil level and add as much oil as necessary.
OIL PRESSURE SWITCH
1. If "OIL PRESSURE" indicating lamp lights when ignition switch is set to "ON" and goes out when
engine is started and runs at idle, then everything is in order. If "OIL PRESSURE" lamp does not light
when ignition switch is set to "ON" check switch, lamp and wiring.
2. If there is current flow when ignition switch is set to "ON" and if there is no current flow when engine is
running at idle, switch is good.
If switch is good, check lamp and wiring.
Operating pressure of oil pressure switch: 19.6 - 39.2 kPa (0.2 - 0.4 kg.cm
2
, 2.84 - 5.69 psi)
Fig. 19: Illustrating Oil Pressure Switch
Courtesy of KIA MOTORS AMERICA, INC.
3. Using 24 mm deep socket, tighten the switch to the specified torque.
Tightening torque
NOTE:
Do not tighten the oil pressure switch to the excessive torque.
2002 Kia Sedona EX
2002 ENGINES 3.5L V6 - Sedona
Helpmelearn
June-06-08 8:54:29 AM
Page 19
© 2005 Mitchell Repair Information Company, LLC.
