Revision Date
4/22/2013
Page 15 of 25
KIA Genuine Accessories
1. Verify all connections are secure as per the installation instructions.
2. Connect the programming button to the corresponding remote start module connector (if disconnected).
3. Secure the programming button and the remote start harness with three (3) small wire ties and four (4) large
wire ties to the factory harness, as shown above. Trim off excess wire ties.
N
O
T
E
21
Wire Cutter
!
Large Wire Ties
WARNING! Engine Stall Hazard. To prevent stress on the remote start wire harness, ensure the tilt/
telescopic steering column is fully extended, if equipped. Ensure all connectors are fully engaged and
locked in place. An engine stall could cause serious physical injury or vehicle damage.
Small Wire Tie
Door Ajar
Module
Small Wire
Ties
Programming Button
Large Wire Tie
