KIA UNIVERSAL MULTIMEDIA INTERFACE TESTER UPDATE KIT
Page 6 of 7
TSB: SST 038 All Models June 2015
SUBJECT:
1. Press and release
PAIR/CALL
button.
2. When all 3 LEDs flash, press and release
PAIR/CALL
button.
Performing a Test-Call
1. Confirm pairing is complete (
Bluetooth
®
LED will be in a quick flash mode). If
Bluetooth
®
LED is not in quick flash mode
(solid light), press and release PAIR/CALL
button to enable quick flash mode.
2. Press and release
PAIR/CALL
button to
test Bluetooth
®
functionality.
3. Use the vehicle controls to answer the call.
After
recording
confirms
a
“working”
Bluetooth
®
system, use the vehicle controls
to end the call.
NOTE:
Some audio units may need the MIT set
as “Priority 1” for the test-call to
complete.
To perform another test-call, repeat
steps 2 & 3. The MIT will remain paired
after the call is ended. Place the MIT in
Bluetooth mode and press and release
the Pair button to re-connect.
When re-testing the Bluetooth pairing
capability with the same audio head unit,
the MIT must be reset by disconnecting
the USB power cable and reconnecting.
Bluetooth
®
Pairing (Passkey 0000):
NOTICE
When testing is complete, delete MIT
from
the
audio
system
before
returning the vehicle to the customer.
