6
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
WorkUp
®
Adjustable Table - Model HF
Assembly Instructions
Electrical Cables (cont.)
4. Carefully invert the table to its
upright position.
Caution:
The table
is very heavy. Two or more people
are required to turn table upright.
5. Adjust leveling glides to
accommodate for uneven floor.
6. Tuck the loose cables into the open
side of the plastic wire trough
(Figure 8, Detail G).
7. Insert the power cord into the socket
on the control box (Figure 7).
Note:
Do not attempt to adjust the
table until the system is initialized.
Initializing The Table
1. Plug the power cord into a 110V AC
outlet (Detail F).
2. Simultaneously press and hold both
the up and down arrows, holding
for five seconds to zero the system.
Continue to hold both buttons until
both legs are at the midpoint of the
travel.
3. Adjust the table to its highest and
lowest positions while checking that
the cables and power cord do not
bind or pull loose.
Operating the Table
Note:
When adjusting the table
always be sure hands are clear of any
potential pinch areas created by the
table and adjacent furniture.
1. The table can be adjusted to the
desired height by pressing the up or
down arrows on the keypad.
Figure 7
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical furnishing, basic precautions should always be
followed, including the following:
Read all instructions before using (this furnishing).
DANGER:
To reduce the risk of electric shock:
1. Always unplug this furnishing from the outlet before cleaning.
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to
persons:
1. Unplug from outlet before putting on or taking parts off parts.
2. Close supervision is necessary when this furnishing is used by, or near
children, invalids, or disabled persons.
3. Use this furnishing only for its intended use as described in these
instructions. Do not use attachments not recommended by the manufacturer.
4. Do not use outdoors.
5.
WARNING:
Risk of Electric Shock-Connect this furnishing to a properly
grounded outlet only. See Grounding Instructions.
SAVE THESE INSTRUCTIONS
CAUTION:
If Channels (Wire Troughs) are used they are not to be used for
routing extension cords. Power supply cords are not to be routed across or
through more than one complete unit/worksurface.
Detail G
plastic wire trough
cables
Detail F
grounding
pin
grounded
outlet
6
