7
Universal Screens - Retrofit Drilling Guidelines
Assembly Instructions
table C
1 / ”
1
4
22
7
/ ”
16
21
7
/ ”
8
1
/ ”
2
2
1
/ ”
8
Drilling Guidelines for Screen Models - 58”, 64” & 70” Wide
22
7
/ ”
16
21
7
/ ”
8
Universal Screens - Retrofit
Drilling Guidelines
Note:
If tables do not have
pre-drilled holes under the tabletops
for installing screens, retrofitting will
be required.
1. Take note of correct retrofit drilling
guideline illustrations for mounting
adjustable mechanisms or
fixed-height brackets to tabletops.
Depending on the table unit ordered,
the length of the tabletop determines
the appropriate size of the Universal
Screen. Reference the “Universal
Screen Selection Chart” to determine
appropriate retrofit drilling
guidelines.
2. Position the adjustable mechanism
or fixed-height bracket under the
tabletop surface at the designated
location. Using the mechanism or
bracket as a drilling template, mark
the mounting hole locations, making
sure the mechanism or bracket is
parallel to the edge of the tabletop.
Then use an
1
/
8
” drill to bore pilot
holes
1
/
2
” deep at each marked
location.
Note:
Height-adjustable screen
models (USPF and USFA) are
available with 24” and 31” high
screens, while fixed-height models
(USPFF and USFAF) are available
with 24” and 31” high privacy
screens and 29” high privacy screen
with modesty panel.
Table
Length(s)
Screen Models
(USFAXXXX,
USFAXXXXF,
USPFXXXX &
USPFXXXXF)
N/A
2324, 2329, 2331
30”
2924, 2929, 2931
36” & 42”
3524, 3529, 3531
48”
4624, 4629, 4631
54”
5224, 5229, 5231
60”
5824, 5829, 5831
66”
6424, 6429, 6431
70”
7024, 7029, 7031
84”*
8224, 8229, 8231
Universal Screen
Selection Chart
*Designed for Toggle Square Shoe
Tables with a 84” side.
1 / ”
1
4
27
7
/ ”
8
28 /
7
16
”
28 /
7
16
”
1
1
/ ”
2
2
1
/ ”
8
27
7
/ ”
8
Drilling Guidelines for Screen Model - 84” Wide
table C
