background image

6

Universal Screens - Retrofit Drilling Guidelines

Assembly Instructions

1 / ”

1

4

table C

6”

5 / ”

3

8

Drilling Guidelines for Screen Model - 23” Wide

6”

5 / ”

3

8

table C

1 / ”

1

4

10

7

/ ”

16

Drilling Guidelines for Screen Models - 29” & 35” Wide

10

7

/ ”

16

9 / ”

7

8

9 / ”

7

8

table C

1 / ”

1

4

13

7

/ ”

16

Drilling Guidelines for Screen Model - 46” Wide

13

7

/ ”

16

12

7

/ ”

8

12

7

/ ”

8

Universal Screens - Retrofit 

Drilling Guidelines

Note: 

If tables do not have  

pre-drilled holes under the tabletops 

for installing screens, retrofitting will 

be required. 

1. Take note of correct retrofit drilling 

guideline illustrations for mounting 

adjustable mechanisms or  

fixed-height brackets to tabletops. 

Depending on the table unit ordered, 

the length of the tabletop determines 

the appropriate size of the Universal 

Screen. Reference the “Universal 

Screen Selection Chart” to determine 

appropriate retrofit drilling 

guidelines. 

2. Position the adjustable mechanism 

or fixed-height bracket under the 

tabletop surface at the designated 

location. Using the mechanism or 

bracket as a drilling template, mark 

the mounting hole locations, making 

sure the mechanism or bracket is 

parallel to the edge of the tabletop. 

Then use an 

1

/

8

” drill to bore pilot 

holes 

1

/

2

” deep at each marked 

location. 

Note: 

Height-adjustable screen 

models (USPF and USFA) are 

available with 24” and 31” high 

screens, while fixed-height models 

(USPFF and USFAF) are available 

with 24” and 31” high privacy 

screens and 29” high privacy screen 

with modesty panel.

Table 

Length(s)

Screen Models 

(USFAXXXX, 

USFAXXXXF, 

USPFXXXX & 

USPFXXXXF)

N/A

2324, 2329, 2331

30”

2924, 2929, 2931

36” & 42”

3524, 3529, 3531

48”

4624, 4629, 4631

54”

5224, 5229, 5231

60”

5824, 5829, 5831

66”

6424, 6429, 6431

70”

7024, 7029, 7031

84”*

8224, 8229, 8231

Universal Screen  

Selection Chart 

*Designed for Toggle Square Shoe  

  Tables with a 84” side.

12

7

/ ”

8

Drilling Guidelines for Screen Model - 52” Wide

13

7

/ ”

16

13

7

/ ”

16

12

7

/ ”

8

1

1

/ ”

2

2

1

/ ”

8

1 / ”

1

4

table C

Summary of Contents for USPF2324









Reviews: