KI USPF2324, Assembly Instructions Manual

Page: 1 / 8

Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Assembly Instructions
Universal Screens
Fixed-Height & Height-Adjustable
October 2020
Important: This instruction
consists of two separate instructions,
one explaining how to assemble
Universal Height-Adjustable Screens
and the other explaining how to
assemble Universal Fixed-Height
Screens. If Universal Height-
Adjustable Screens are to be
installed, reference the instructions
on pages 1 through 3. If Universal
Fixed-Height Screens are to be
installed, skip pages 1 through 3 and
proceed to the instructions on page 4.
Universal Height-Adjustable
Screens Installation
Note: If tables do not have
pre-drilled holes under the tabletops
for installing screens, retrofitting will
be required. See page 6, “Retrofit
Drilling Guidelines.”
1. Carefully remove contents from
shipping cartons and identify parts
and hardware supplied.
Note: The Universal Height-
Adjustable Screen may be installed
on Pirouette, WorkUp, and Toggle
Table models. Certain table models
allow screens to be mounted on the
side of the table as a divider screen.
The assembly process is the same
for divider screens and privacy
screens. The following instructions
show the installation of a privacy
screen to a 24 x 48” Pirouette
Fixed-Base Rectangular Table, your
configuration may vary.
Important: Five different adjustable
mechanisms are designed to install
for different screen widths/weights.
Each of the five mechanisms is
weight-balanced differently and is
color coded with a different blue,
green, pink, purple or yellow round
sticker applied under the mounting
bracket. It is important to reference
the Screen Model/Mechanism
Charts on this page and use the
correct mechanisms per the screen
model being installed. If screens are
installed with the incorrect adjustable
mechanisms, screens will not be
counter balanced properly and
disassembly and correct reassembly
will be required (Detail A).
2. Locate an adjustable mechanism
per the screen model being installed
and position the mounting bracket
to align with the pre-drilled holes on
the underside of the tabletop. Secure
mechanism to the underside of the
tabletop using four #12 x 1” screws
(Figure 1).
Figure 1
Pirouette table
fixed-base
#12 x 1”
PPH screws
adjustable
mechanism
mounting
bracket
vertical
railway
Screen
Models
(USPF &
USPFF)
Mechanism
1
Mechanism
2
Mechanism
3
USPF2324 Yellow Yellow N/A
USPF2924 Yellow Yellow N/A
USPF3524 Yellow Green N/A
USPF4624 Green Green N/A
USPF5224 Green Yellow Green
USPF5824 Green Yellow Green
USPF6424 Green Green Green
USPF7024 Green Green Green
USPF8224 Green Pink Yellow
USPF2331 Yellow Yellow N/A
USPF2931 Yellow Green N/A
USPF3531 Green Green N/A
USPF4631 Yellow Pink N/A
USPF5231 Green Green Green
USPF5831 Yellow Pink Yellow
USPF6431 Green Pink Yellow
USPF7031 Green Green Pink
USPF8231 Pink Green Pink
Screen
Models
(USFA &
USFAF)
Mechanism
1
Mechanism
2
Mechanism
3
USFA2324 Green Green N/A
USFA2924 Pink Green N/A
USFA3524 Blue Yellow N/A
USFA4624 Blue Pink N/A
USFA5224 Pink Pink Pink
USFA5824 Green Purple Green
USFA6424 Blue Yellow Blue
USFA7024 Blue Green Blue
USFA8224 Blue Blue Blue
USFA2331 Pink Green N/A
USFA2931 Pink Pink N/A
USFA3531 Blue Pink N/A
USFA4631 Blue Blue N/A
USFA5231 Blue Green Blue
USFA5831 Blue Pink Blue
USFA6431 Blue Blue Blue
USFA7031 Purple Green Purple
USFA8231 Purple Blue Purple
blue, green,
pink, purple or
yellow sticker
Detail A
Polyester Felt Screen Model/Mechanism Chart Upholstered Screen Model/Mechanism Chart