Uniframe
®
Convertible Bench
Assembly Instructions
movement at pivot points.
4
Detail D
Top Leg Brace to Apron
*Steel spacers allow the fasteners to tighten
without restricting movement at pivot points
Figure 3 - Braces to Top at Apron Assembly
1. Attach
3
/
8
” flat washer (item 7) and steel spacer (item 1) onto both apron bolts in
sequence shown (Figure 3 & Detail D).
2. Rotate top assembly up (Figure 3).
3. Rotate both top support brackets up and locate them onto the apron bolts. Spacers
go into the brace hole (Figure 3 & Detail D).
4. Install
3
/
8
” flat washer (item 7) and
3
/
8
-16 nylon lock nut (item 3) onto apron bolts
and tighten (Detail D).
Note:
Steel spacers allow the fasteners to tighten without restricting
locking
brace
/ -16 nut
brace
/ -16 nut
bolt
brace
item 1*
item 3
