7
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Toggle
®
Tables - Triple Motor C-Leg Height-Adjustable Square Shoe Base, Model SS
Assembly Instructions
This product is for use on a nominal 120-volt circuit and has a grounding plug
that looks like the plug illustrated in Detail H. Make sure that the product is
connected to an outlet having the same coniguration as the plug. No adapter
should be used with this product.
GROUNDING INSTRUCTIONS
Wire Trough (optional)
Note:
The wire trough is an
accessory that must be ordered
separately.
Note:
Control cables can be routed
differently than shown. Tables may
have the control box mounted either
between the cross-tube assemblies
on the longer side of the table or
centered in front of the square shoe
leg.
1. Align the wire trough mounting
holes to the appropriate holes in
the tabletop, making sure the larger
cutouts on the trough are facing
the user side of the table. Using six
#10 x
5
/
8
” pan head screws, secure
the wire trough to the tabletop as
illustrated (Figure 9).
2. With help from another person,
carefully turn table to the upright
position. Adjust glides on feet to
level the table. Plug the power
cord into a grounded outlet power
source (Detail H).
Note:
Power cord
must have enough slack so the table
can cycle through its entire range of
motion.
3.
The table must be “zero set”
prior to being placed into
service. Refer to table “zero
setting” instructions in the
trouble shooting guide on
page 9.
4. If the table is not operating properly,
see the trouble shooting guide in this
instruction.
Figure 9
wire trough
(48” shown)
#10 x / ”
pan head
screw
5
8
wire trough
(24” shown)
control box
power
cord
USER
SIDE
Detail H
grounding
pin
grounded
outlet
