Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Repair & Replacement Instructions
Soltice
®
Metal Multiple Seating
Reconfiguring Multiple Seating
August 2019
Model Numbers
Guest Chairs: SOMC, SPMC
Loveseats: SOM33, SPM33
Bariatric Chairs: SOMB, SPMB
Armed Spanners: SOM3S, SPM3S
Note:
Prior to reconfiguring multiple
seating, read and understand all
instructions before rearranging units.
Note:
The following instructions
show the reconfiguration of Soltice
Metal bariatric and guest chairs. Your
configuration may vary.
Connecting Table Bracket
Overview
1. Create a space-planning layout
using grid paper to plan out the new
reconfigured multiple seating layout.
2. Connecting tables attached
to multiple seating units that
require rearrangement need to be
disassembled before moving. Using
a Phillips screwdriver, remove all
#10 x
3
/
4
” wood screws securing
the tabletops to connecting table
brackets (Figure 1).
Note:
The assistance of a second
person is required to assemble and
place multiple seating in its final
location. Do not move seating units
that exceed five seating positions, as
damage may occur to the assembly.
3. Rearrange multiple seating units
in approximate location per the
reconfigured space-planning layout,
leaving a gap between the seats
intended to join tables (Figure 2).
Figure 1
connecting
table bracket
#10 x / ”
Phillips wood
screws
3
4
center
connecting
table
45 degree
connector
table (inside)
connecting
table
bracket
connecting
end table
bariatric
chair
guest
chairs
Figure 2
guest
chairs
bariatric
chair
