11
Pirouette Tables™ Nesting-Base with Villa, PowerUp or No Power - Connections with Source Power
Assembly Instructions
This product is for use on a nominal 120-volt circuit and has a grounding plug
that looks like the plug illustrated in Detail L. Make sure that the product is
connected to an outlet having the same configuration as the plug. No adapter
should be used with this product.
GROUNDING INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical furnishing, basic precautions should always be
followed, including the following:
Read all instructions before using (this furnishing).
DANGER:
To reduce the risk of electric shock:
1. Always unplug this furnishing from the outlet before cleaning.
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to
persons:
1. Unplug from outlet before putting on or taking parts off parts.
2. Close supervision is necessary when this furnishing is used by, or near
children, invalids, or disabled persons.
3. Use this furnishing only for its intended use as described in these
instructions. Do not use attachments not recommended by the manufacturer.
4. Do not use outdoors.
5.
WARNING:
Risk of Electric Shock-Connect this furnishing to a properly
grounded outlet only. See Grounding Instructions.
SAVE THESE INSTRUCTIONS
Electrical Rating:
120V 12 A
WARNING:
Risk of Injury-Maximum Load 4.7 lbs. per inch width.
Pirouette Nesting-Base Tables -
Villa/PowerUp Connections with
Source Power
1. Place tables in final location and lock
the two front, user side casters in
place on each table. (Figure 17).
2. Plug the power module into an
appropriate location only after
all other components have been
installed.
3. When tables are un-ganged, on the
back user side, detach the ganging
hook and snap both ends to the two
installed pegs for storage near the
center of the tabletop.
power module
with 3-prong plug
(PowerUp shown)
Detail L
grounding
pin
grounded
outlet
Figure 17
locking
caster
locking
caster
locking
caster
power module
with 3-prong plug
(Villa shown)
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
