1330 Bellevue Street • P.O. Box 8100 • Green Bay, WI 54308-8100 • Tel 1-800-424-2432 • www.ki.com
© 2021 Krueger International, Inc. All Rights Reserved • Code KI-RR-000034/KI/PDF/1021
Gladly™ Lounge Chair
Repair & Replacement Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Press-In Glide Replacement
(metal leg only)
1. Place chair upside down onto a
soft, protective surface.
2. Using a putty knife, pry up on the
glide edge until it is free
(Figure 1).
3. Once glide its removed, press in
the new replacement glide and
lightly tap in with a rubber mallet
Figure 2).
Nail-In Glide Replacement
(wood leg only)
1. Place chair upside down onto a
soft, protective surface.
2. Using a putty knife, pry up on the
glide edge until it is free
(Figure 1).
3. Once glide its removed, center the
new replacement glide on bottom
of leg and lightly tap in with a
rubber mallet Figure 2).
Threaded Glide Replacement
(wood leg only)
1. Place chair upside down onto a
soft, protective surface.
2. Grip glide with hand and turn
counter clockwise to loosen.
Once loose, un-thread the glide
from the leg (Figure 1).
3. Once glide its removed, thread in
the new replacement glide in to
the threaded hole clockwise until
it is tight (Figure 2).
