KI Enlite ENBT AD Series, Assembly Instructions Manual

Page: 10 / 12

8
Enlite Tables
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Care and Maintenance
KI Enlite tables require minimal
maintanence. The high pressure
laminates used on the
continuous tables also require
minimum maintenance.
To clean laminate, use a mild
solution of water and detergent.
Pine-Sol and warm water works
very well. Wipe clean with a dry
cloth. As a last resort, stubborn dirt
or grease may be removed with a
lacquer thinner or other solvents.
Some stains such as grape juice
may be removed by wetting the
table surface and sprinkling lightly
with baking soda, then wipe clean
with a damp cloth. As always,
thoroughly dry the surface with a
dry cloth. Never use a harsh
abrasive such as Comet cleanser,
scrub pads, etc., to clean the
surface. To maintain a bright
attractive surface, occasionally
apply a coating of wax (the same
you would use on your home
furniture) to the table top.
Gouges and abrasions in the vinyl
“Bull Nose” edging can be removed
with “000” steel wool. Apply a light
coating of vinyl floor wax to restore
the sheen. Mop and Glo works well.
Never use a water hose to clean a
table. In the event a table becomes
wet, as soon as possible thoroughly
dry both sides of the top with a dry
cloth. Excessive moisture will cause
the particleboard core to swell the
top and bottom, exposing the core
behind the molding. The top will
appear to grow in thickness.
Do not use these products:
l
Solvent based cleaners such as
mineral oil, mineral spirits or
turpentine.
l
Citrus cleaners (all contain
high levels of citric acids that
penetrate plastics).
l
Orange oil based cleaners (all
contain citric acid).
l
Heavy-duty cleaners such as
Fantastic, 409 and other
aggressive industrial cleaners
that are designed for bathrooms
and kitchens.
l
Powdered cleaners such as Ajax
or Bon-Ami.
l
Proper care and careful use is
the best method of maintaining
the finish of the product.