Required
Tools
Disassembly Instructions
Material Type:
Warning: This drawing format requires special non-standard fonts!!
Make sure the appropriate font files are installed!!!
TT Humanst 521 BT Light
O HelveticaLTStd-Cond
O HelveticaLTStd-LightCond
Engage Task Chair, Engage Stool, Piretti 2000 Task Chair, Piretti 2000 Stool
Page 3 of 3
Rev. 1
©2013 Krueger International, Inc. All Rights Reserved · P0033-0080
A. Steel
B. Plastic
C. Foam
D. Fabric
KI · 1330 Bellevue Street · P.O. Box 8100 · Green Bay, WI 54308-8100 · 1-800-424-2432 · www.ki.com
All fasteners not explicitly tagged
are Material Type A: Steel
6. Invert the chair and gently tap on the bottom of the steel height
adjustment cylinder while lifting the plastic base. Remove the
plastic chair base and height adjustment cylinder shroud from
the steel cylinder.
WARNING: CONTENTS UNDER PRESSURE!
REMOVE WITH CAUTION.
7. Discard the backrest, seat, chair base and plastic components.
8. Recycle the seat support mechanism, back support (J-bar) and
height adjustment cylinder.
Safety Glasses
Gloves
Channel Lock Pliers
Pry Bar
Rubber Mallet
A
A
B
