55
Center of Gravity (COG)
To adjust the center of gravity location:
a. Remove both rear wheels.
b. Loosen the two screws (C) and nuts (D) that secure the camber mounts (A & B) to the seat tubes on
each side of the frame.
c. Grasp both sides of the camber tube and move the camber mounts forward or rearward along the
seat tube. You should feel the detent click into each dimple in the frame as you move the mounts
forward or rearward. Adjustments are made in ¼" increments.
d. Make sure the mounts on both sides of the frame are adjusted equally on both sides of the frame
before reinserting screws and nuts. Tighten until secure.
e. Once the camber mount clamps are secured, attach the rear wheels, occupy the chair and manuever
it with a spotter to get a feel for the new adjustment.
NOTE: Always use at least two screws when attaching the camber mount to the frame.
A
B
C
D
