Ki Mobility Axiom DL, User Instruction Manual & Warranty

Page: 10 / 31

9
A. Fitting Your Axiom Back and Wheelchair (Continued)
Custom Adjustments
1. Adjust the height of the backrest, if needed, by loosening the two nuts (Fig.8:A) on the
backrest bracket. Slide shell up or down to achieve desired height and retighten hardware.
Ensure both sides are set the same.
2. The angle and the depth of the backrest are adjusted, if needed, at the same time. Loosen
the two bolts (Fig. 9:A) on the bracket and adjust the angle and depth of the backrest in one
movement. Retighten hardware once desired configuration is achieved.
3. Tighten all hardware to 110 in-lbs except the acorn nuts which are tightened to 80 in-lbs.
Overtightening the back post clamp hardware may cause damage to backrest canes.
4. With no user in chair, remove and reinstall backrest multiple times to ensure alignment is
correct and all pieces are secured in place.
WARNING: Failure to properly orient the Axiom Back and cover can affect your skin
integrity which can result in serious injury or death.
WARNING: Failure to properly select the Axiom Back and cover that can be retained in the
wheelchair can cause you to fall from your wheelchair, resulting in serious injury or death.
A
A
Fig. 8
A
Fig. 9