KGUARD Standalone (KG-SH330&SH530) User Manual
www.kguardsecurity.com
31
4
Motion Detection
whether the motion detection of this camera is enabled or not.
Press
ENTER
or
to check(
) or uncheck (-) this item.
5
Motion
(
Settings..)
This is the motion detection setting.
(
Press
ENTER
in
Settings..
to call up
Motion Setup
display for the
camera.
Please refer to section 7.7.2.2 on motion setting for detail
information)
6
Covert
covert or not. If the camera is covert, the video of this camera can
only be seen if the user has logged in as Administrator. Press
Press
ENTER
or
to check(
) or uncheck (-) this item.
NOTE: When covert is activated, only administrator/supervisor level
users can view the live video of the respected camera.
7
Call By Event
(Call Monitor)
This feature will cause a specified channel to display upon a
specific event trigger.
8
Dwell Time
User may adjust the value to determine the display time of the call
monitor.
9
Audio
The audio setting allows user to turn on/off the sound recording
option.
10 Record Quality
Press
to adjust the recording quality from 1 (low) to 9 (highest).
11
Event Record IPS
Press
to adjust the event recording rate as Image per Second (IPS).
12 Pre-Record IPS
Press
to adjust the pre-recording rate (IPS).
13 Normal Record IPS
Press
to adjust the normal recording rate (IPS).
7.7.2.1 Video Loss Setting
In
Setup
display, press
▲▼
to change the highlighted option to
Video
Loss Settings..
, and then press
ENTER
to call up
Video Loss Setup
display as shown below.
1
2
3
4
5
6
7
8
9
10