background image

3

AS-50x

Manual Conventions 

Safety Rules

Do not use this winch for lifting or moving 

people or animals.

DANGER

Read this manual thoroughly before operating 

your winch. Failure to follow instructions could 

result in serious injury or death.

WARNING

Do not move the vehicle to pull a load (towing) 

on the winch cable. This could result in cable 

breakage.

WARNING

Pull only on areas of the vehicle as specified 

by the vehicle manufacturer

WARNING

Do not exceed the rated capacity.

WARNING

Keep yourself and others a safe distance to 

the side of the cable when under tension.

WARNING

Never step over a cable or near a cable under 

load.

WARNING

The cable may break before the motor stalls. 

For heavy loads at or near rated capacity, use 

a pulley block/snatch block to reduce the load 

on the wire rope.

WARNING

Do not use the winch to secure or hold a 

vehicle for a long period of time. Do not use 

the winch to secure a vehicle for transport.

WARNING

Disconnect the remote control and battery 

leads when not in use for extended periods.

WARNING

Avoid “shock loads” by using the control switch 

intermittently to take up the slack in the wire 

rope. “Shock loads” can far exceed the rate 

capacity for the cable and drum. 

Do not accelerate your vehicle while winching. 

Loss of traction can cause a shock load on the 

cable.  Do not use cable as a pull strap.

WARNING

Summary of Contents for Assault AS-50x






















Reviews: